Detailed Product Description

Coax Ethernet Bridge,E1 to ethernet ethernet cable bridge 

Description

 DT2106A series coax Ethernet Bridge are unique for its high performance, high stability and compact size. It combines RF splitter and Ethernet switch together to realize transmission via the second layer of coax. Signals input through a coaxial interface and a 10/100Mbps data interface and output through 6 coaxial F type interface and a 10/100Mbps Ethernet data interface, each support 10 Mbps rate. And users can configure DT2106A through a CONFIG port.

Port-based VLAN provide isolation between users and the communication signals can only be exchanged to trunk ports, thus preventing peer communication between users.

Its unique design provides users with many access and output approaches and satisfies the users in many ways such as compact size, industrial-level housing, anti-interference, lightning proof, etc..

Features:

1.      Two 100Base-T interfaces for repeat and circuit series connection.

2.      6 RF ports for CATV signals and Ethernet data.

3.      Intelligent port control, automatically detect EOC state in real time and can resume after problems detected.

4.      Conform to YD/T950-1998, lightning-proof for power supply and interfaces.

5.      RF signals direct to users, users can still watch TV when power cut off.

6.      Shut down or switch on every port as you wish without influence on the other ports.

7.      Support multi-cast and IGMPv2 listen in protocol.

8.      Automatic MAC addresses learning and maturity.

9.      Support tagged VLAN based on 802.1Q.

10.   Loop Detection and inhibition.

11.   Automatic and manual configuration from an external server based on HTTP / DHCP.

12.    Local configuration is available through RJ-45 port .

Technical Specifications